Controls CGI
| Version / Author / Date | Modify |
|---|---|
| 1.0/David/2013-03-30 | First edition |
Overview
To PTZ operation involves only
PTZ operation
ptz_control.cgi
- Permissions requirements:
Control permissions. Note: If you set a preset operation, namely command = 16 is required administrative privileges
- Syntax:
/ Ptz_control.cgi? Command = [& param = & user = & pwd = & session = & json = & jsonp_callback = & next_url =]
- Parameters:
User / pwd: Parameter authentication method required to login username / password session: Session authentication method required to Session ID json / jsonp_callback: return the json type of data set command: PTZ operation command param: PTZ operation command parameters Operation command param To stop 0 No PTZ vertical direction Head up the number of steps of the motor movement, 0 means no limit Head down 2 PTZ horizontal direction to stop 3 PTZ left 4 motor movement steps, 0 means no limit The Yuntai right 5 PTZ stop 6 no Head up and to the left 7 the number of steps of the motor movement, 0 means no limit Head up and right 8 PTZ down and to the left of 9 PTZ down and to the right 10 PTZ calibration 11 no PTZ centered 12 no Cruise 13 cruise laps the PTZ vertical direction, 0 means no limit PTZ horizontal direction cruise 14 PTZ trajectory cruise 15 Set PTZ preset position 16 To set the preset position, the value :1-32 Moving to PTZ preset position 17 preset position heading, value :1-32 Stop Zoom 18 no Zoom widens the number of steps of the 19 motor movement, 0 means no limit Zoom Telephoto 20 Aperture stop 21 no Aperture zoom 22 motor movement steps, 0 means no limit Aperture smaller 23 Infrared light switch (disabled) 240: Off, 1: On Alarm IO output level 250: low, 1: high Stop focal length of 26 no Focal length closer to the number of steps of the 27 motor sports, 0 means no limit Focal length of pull far 28 next_url: return to the page after the successful operation.
- Returns:
Operating results text information or specified page.
- Example:
Http://192.168.0.188/ptz_control.cgi?command=1&session=1891048766 the user operating head upward movement